STREETSCAPE GRADE 1 OR D
Fire Opal - 1SFL
MS-STS-FL

Application Upholstery
Content 61% Polyester, 39% Olefin
Width 54"
Weight 9.1 oz./lin. Yd.
Fabric Treatment BLOCKaide
Seam Slippage ASTM D4034. 25 lbs. min warp and weft
UFAC Classification Class 1
Repeat 3.187" Vertical, 3.375" Horizontal
Finish/Backing s.b.r. latex
Abrasion Resistance ASTM D4157-02 (ACT #10 Cotton Duck) 50,000 double rubs (wire screen)
Flammability CA Tech Bulletin #117 Section E – Class 1
Color Fastness AATCC 8-2001 Dry Crocking Grade 4 min., Wet Crocking grade 3 min.
Tensile Brush Pill ASTM D3511-02, Class 3 min.
Light Fastness AATCC 16 Opt. 1 or 3 - Grade 4 min. at 40 hrs.

View Streetscape Grade 1 or D Fabric Card PDF (KI-32367)
Fire Opal
Black & Tan
Blue on Blue
Cactus Sand
Honeycomb
Hot Lava
Purple Haze
Rainforest
Tuxedo
Grade 1 or D

Abrasion resistance is the surface wear of a fabric caused by rubbing and contact with another fabric.

Flame resistance is the measurement of a fabric's performance when it is exposed to specific sources of ignition.

Crocking is the transfer of dye from the surface of a dyed or printed fabric onto another surface by rubbing. 

Pilling is the formation of fuzzy balls of fiber on the surface of a fabric that remain attached to the fabric. Seam slippage is the movement of yarns in a fabric that occurs when it is pulled apart at a seam.
 
Colorfastness to light refers to a material's degree of resistance to the fading effect of light.

Colors may vary slightly between dye lots. Streetscape is a directional fabric.